Compare and Contrast: ‘Always a Motive’ and ‘Gentlemen, Your Verdict’ Essay

Recently I’ve read two very good short stories: Always a Motive (by Dan Ross) and Gentlemen, Your Verdict (by Michael Bruce). Always a Motive is about a young man, named Joe Manetti, who is accused of kidnapping. Gentlemen, Your Verdict is about five men who are questioned about the murder of sixteen crewmembers. While both Always a Motive and Gentlemen, Your Verdict are written in third person and pull at the readers emotions, Always a Motives theme is how people tend to see things only from one perspective and things can change in an instant while Gentlemen, Your Verdicts theme focuses on the justification of murder in certain circumstances. Gentlemen, Your Verdict is a story that teaches us that sometimes in life we have to kill, or let someone die to ensure the survival of others. In this story Lieutenant-Commander Oram (who’s in charge of the submarine) is forced to play god when his submarine goes down. There is only enough air for two days and rescue won’t come until five days after their oxygen supply will run out. Lieutenant-Commander Oram would rather let some of his crew survive than have them all die. But he has a hard choice to make: who will be the ones to survive, which I believe is also a part of the theme. He makes a solemn choice to kill sixteen men, including himself, to save the lives of the five married men on-board; because they have a wife and possibly even children that would live sorrowfully if their father was gone. This statement is turned around in Always a Motive, where a father loses his son and wife and is forced to live a miserable life alone. Joe Manetti was a father to a little boy and a happy husband, but tragedy struck when his son was ran over and killed by a truck. After that Joe’s life fell apart; his wife left him, he doesn’t work anymore, he barely eats, and he runs away from his problems by driving , driving for however long until he feels okay. One day during one of his driving ‘spells’ he comes back from getting groceries and finds a baby on his backseat. He finds a note on the baby saying he belonged to the Millers. Joe takes care of the babe and brings him home to a worried father; but he suddenly finds himself getting questioned about kidnapping the Miller boy. Now, the inspector who questions him finds out Joe’s story and he feels for Joe; but he knows that when there’s â€Å"[people] like [Joe] involved† (Tigers of the Snow p109), people who  have lost their children, they usually are the culprits. Abruptly an expressway toll station worker comes bearing an alibi for Joe, saying that at the time the Miller boy was kidnapped Joe was at the toll. This reveals the themes of the story: how people tend to see things only from one perspective and things can change in an instant. The inspector only saw the side of Joe that made him a kidnapper and suddenly Joe is an unsuitable kidnapper. But there is one thing that lacks from Joe’s story, his motive for returning the Miller boy without the help of the police. But the man who lost his boy only wanted to see the man who found his. The moment that Joe says this is one of the most heartbreaking pieces of literature that I have read. Both Always a Motive and Gentlemen, Your Verdict have their moments where, as a reader, you feel for the characters. However different these stories are, they both pull at the readers heartstrings.

Ap Chemistry Free Response Answers

1. (a) I, III, and IV are correct. II is not correct. To explain III, de Broglie's equation states l = h/(mv), so nl = nh/(mv) = 2pi(r). Where: l = wavelength, v = velocity of electron, n = some positive integer, r = distance of electron from center, m = mass of electron. Solve, get mvr = L = nh/2pi. (b) The current wave mechanical model for the atom states that there are an integer number of wavelengths in every standing  integer number (n). 2. (a) The first shell electrons in Lithium are the closest electrons to the nucleus. In addition, there are proportionally more protons to electrons.This pulls the electrons even closer to the nucleus. And in Potassium, the outer shell electrons are a substantial distance from the nucleus. There are a greater number of protons than electrons; however, the large number of electrons dissipates the effect. This is in addition to Lithium being a much smaller neutral atom than Potassium because of the difference in the outer shells. (b) The outer shell for Cl is the same as Cl-; however, Cl-  has more electrons being  attracted by the same number of protons. This weakens the attraction per electron. Since the attraction is weaker, the electrons are farther from the nucleus.Since the attraction is stronger for Cl, the electrons are closer to the nucleus. (c) Although the normal trend is for the ionization energy to increase going to the right in a period, aluminum has a lowered ionization energy and magnesium has a raised ionization energy due to the electron configurations of these two ionizations. This reverses the order of ionization energies. (d) The ionization energy increases each time an electron is removed because there are fewer electrons attracted by the same number of protons while magnesium starts off at a relatively  high value because it begins in one of the preferred forms.The second ionization energy is lowered because losing an electron forms a preferred form and because of this, this is a smaller than normal increase in ionization energy between the first and second ionization energies. The third ionization energy is increased the most because it starts in the most standard form. When you combine this with a lower than normal second ionization energy, you get a very large increase in ionization energy. 3. (a) As you go to the right of the period, there are more protons in the nucleus.The greater attraction makes it more difficult to remove electrons and first ionization energy is the energy necessary to remove an electron from a neutral atom. (b) Although the general trend is to have Boron with a higher first ionization energy than Berylium, Boron's ionization potential is lowered and Berylium's ionization potential is raised, the order is reversed. (c) O loses one electron and makes it easier to remove the electron and lowers the ionization potential. For nitrogen, it more difficult to remove the electron and raises the ionization potential.And since Oxygen's ionization potentia l is lowered and Nitrogen's ionization potential is raised, the order is reversed. (d) Na has a lower first ionization energy than Li and also a lower ionization energy than Ne. Ne has the second highest first ionization energy of all the elements. â€Å"1s2†Ã‚  is the most preferred electron configuration. â€Å"s2  p6†Ã‚  of other shells are also highly preferred. Ne has the second highest first ionization potential because it’s â€Å"2s22p6†. 4. (a) The type of decay expected for Carbon-11 would be positron emission. 116C -; 115B + 01e (b) The type of decay expected for Carbon-14 would be Beta Decay as well. 46C -; 147N + 0-1? (c) Gamma rays have no mass or charge, so they need not be shown in nuclear equations. (d) Measure the amount of Carbon-14 in the dead wood and compare with the amount of Carbon-14 in a similar living object. 5. (a) 23494Pu -; 23092U + 42? (b) The missing mass has been converted into energy (E  =  mc2). (c) A line should be drawn curving downward from the path of the dotted line. This will represent the path of the alpha particles which are repelled by the positive plate and attracted by the negative one. A second line should be drawn upward from the path of the dotted line.This will represent the path of the beta particles which are repelled by the negative plate and attracted by the positive one. The line should curve more than the one for the alpha particles. A third line should be drawn as a continuation of the dotted line. This will represent the gamma rays. (d) Incineration is a chemical process. The only thing any chemical process can do is connect radioactive atoms to other atoms, which has no effect on the radioactivity. 6. (a) As you go down the column in the alkali metals, the outer shell electrons are farther from the nucleus.The attraction for the outer shell electrons is decreased and because the attraction is decreased, therefore the melting point decreases. (b) Intermolecular forces de termine boiling and melting points. Halogens are all diatomic, which means they bond with themselves. In these diatomic compounds, the only intermolecular force is  London forces. The larger molecules can form temporary dipoles easier than small molecules. The larger molecules as you go down the column have a greater attractive force. This increases the melting point as you go down the column. 7. a) As radius increases the heat of reaction decreases. Which means less energy released by ionic attraction. (b) As ionization energy increases the heat of reaction decreases, which means more energy is required to form M2+ while other factors remain unchanged 8. Metals are good conductors of heat, generally malleable, and react by losing electrons to form cations. They tend to have â€Å"s1†,   â€Å"s2†,   â€Å"s2p1†, or   â€Å"s2p2†Ã‚  as their outer shell. Most metals have just â€Å"s1†Ã‚  or  Ã¢â‚¬Å"s2†. Nonmetals are poor conductor s of heat, brittle, and gain electrons when reacting with metals to form anions.Nonmetals have either 3, 4, 5, or 6 electrons in the p subshell in addition to s2  of the same shell number. When the last subshell is a d, the outer shell is s2  of the next shell. Occasionally there will be only 1 electron in the s subshell and this explains when the transition elements are metals. When the last subshell is a â€Å"f†, the outer shell is s2  of the second higher shell and this explains when the lanthanides and actinides are metals. This proves how more than half of the periodic table are metals. 9. (a) â€Å"you have not learned this one yet† (b) â€Å"F2†Ã‚  has the highest  electronegativity  and  electron affinity.Thus it has the greatest attraction for extra electrons. F2   +   2e -;  2F  Ã¢â‚¬â€œ 1   This makes the reaction more likely to occur. â€Å"I2†Ã‚  has the lowest electronegativity and electron affinity. Thus it has less a ttraction for extra electrons making the reaction  Ã‚   I2   +   2e -;   2I  Ã¢â‚¬â€œ 1   less likely to occur. Because it can disperse the charge better, the reaction does occur. (c) The trend for alkali metals shows a very small variation in reducing strength without a real trend. Cesium has the lowest ionization potential and Lithium has the highest ionization potential. However, there is not a great difference in the alkali metals.

Human Resourse Management in Pakistan

HUMAN RESOURSE MANAGEMENT IN PAKISTAN (Major Human recourses challenges in Pakistan public health system, Human Recourse system policies and ways to address those challenges) Introduction Human resources are the heart of the health system and health care managers have a critical role in determination of performance of the system [1]. Our savings and investment level can be raised only when we are in a position to convert our unproductive and underutilized human and natural resources into dynamic and self-sustained capital and potential accelerator of economic growth.The World Health Organization (WHO) has defined the health workforce as â€Å"all people primarily engaged in actions with the primary intent of enhancing health†. This definition is consistent with the WHO definition of health systems as comprising all activities with the primary goal of improving health. The health workforce is one of the most important pillars of the health system. Adequate numbers and quality o f health workers have been positively associated with successful implementation of health interventions, including immunization coverage, outreach of primary care, and infant, child and maternal survival. 2] Human Resource Management is a key to improve productivity of people in the organization. Good Human resource management approach with strategic, ethical and social responsibility which further help to achieve organization goal and objectives. Human Resource management is an art to transform changes as employee commitment and opportunity through developing their knowledge & skills and motivating them. In developing country human resource players are considered necessary since they can serve as intellect of an organization.A loyal, dedicated, skilled, efficient and productive human resources is valuable assets of an organization but not reflected on the balance sheet. [3] Pakistan story In 1947, Pakistan was created as British rule came to an end in India. In 1971, East Pakistan demanded independence, and after a bloody civil war it was transformed into what is now the country of Bangladesh. As one of the most crowded countries in the world, Pakistan faces enormous economic and social crises.Fortunately, however, it possesses an abundance of natural resources that can help it overcome these challenges [4] Pakistan is blessed with huge natural and human resources but most of these are in crude form. â€Å"According to official data, there are 127,859 doctors and 12,804 health facilities in the country to cater for over 170 million people. † [5] â€Å"Infant mortality rate: 72/1,000 live birth, Maternal mortality rate: 260/100,000 live birth instead having 7. 8 Physicians/10,000 population, 3. Nurses and midwifes/10,000 population; overall 11. 6 Health care workforce /10,000 population in the country† [6] In Pakistan the health system remains functionally weak and the quality of health services is poor, despite very old constitutional support fo r health care as a right and a large Ministry of Health at federal and provincial levels [7, 8]. In Pakistan health sector performance has not been evaluated in terms of inputs, processes or activities and outputs for different types of resources including human resources.Very little is known about compositions of health managers, their skills, and training, and spec ifically the policy for deployment. The first and foremost prerequisite for human resources progress is the proper attention to the health sector. No nation can dream of acquiring preeminence in any field with sick and disabled persons so developed nations invest quite a hefty amount in their health sector. In Pakistan, unfortunately, due attention is not paid to this important sector.Human resources for health have recently been emphasized as a central component in providing a stronger health system to achieve the Millennium Development Goals [9]. Absence or nonimplementation of appropriate human resource policies that address appropriate numbers of staff, their qualifications, deployment, working conditions, and gender distribution are associated with many problems in the health work force [10]. Frequency of turnover of key managerial staff has also been associated with poor system performance [11]. Human Resource Development and Management challengesPakistan has been categorized as one of 57 countries that are facing an HRH crisis, below the threshold level defined by WHO to deliver the essential health interventions required to reach Millennium Development Goals (MDGs) by 2015 [12]. Health workforce strategy is usually low on a country’s agenda, despite the understanding that scaling-up health interventions to reach MDGs is not possible without a minimum level of health workforce. National health workforce strategies require reliable and timely information, rational system analysis and a firm knowledge base.However, data analysis, research on HRH and technical expertise are still underd eveloped in many countries, in part due to low investment in HRH [13]. Pakistan’s new draft National health policy 2009 mandated the development of strategies in various key areas, including HRH [14] There is a lack of clear long-term vision for human resource development and the federal MOH or provincial DOH does not have a unit, responsible for such an important health system function. [15] The imbalances in health workforce in terms of cadre, gender and distribution are well known in Pakistan.The public sector continues to heavily invest its scarce resources in the development of medical colleges and universities rather than investing in improving quality and quantity of nursing institutions, public health schools and technicians training institutions. In the context of health system development, there is a serious shortage of qualified health system specialists such as health and human res ource planners, health economists, health information experts and health system and hospital managers.Pre -service training of health professionals follows traditional methods and there is a mismatch between educational objectives, which focus on hospital based care, instead of addressing the needs of the communities for promotive, preventive curative and rehabilitative services. The Pakistan Medical and Dental Council (PM&DC) is responsible for registration, licensing and evaluation of the medical and dental practitioners, the attempts made by PM&DC have not materialized yet.Regulation of private practitioners and different traditional categories of medical practice such as homeopathic doctors and Yunani Hakims is non-existent. Human Resource in health care is not appropriately planned in Pakistan, with the result that there are more doctors than nurses, dearth of trained midwives, urban concentration, brain drain from rural to urban areas and abroad, along with other issues related to curriculum, quality of graduates and their continuing supervision.The service structure for health workers is poorly defined it, favors tenure over competence, largely ignores technical capacities and does not allow incentives or rewards for performance. The conduct of education for medical, nursing and related cadres is mostly conventional and does not utilize recent developments in the field of medical education. Though curricula have been revised from time to time, in majority of cases they are not locally contextualized and are not based on competencies and skills.There is no organized system for continuing medical education for any health providers who are also largely unsupervised and at times ill equipped with newer knowledge/skills to tackle emerging diseases. This holds true for management cadres as well. The health system is currently not conducive to nurses, midwives and allied health professionals playing pivotal roles in ensuring the provision and delivery of effective primary health care services in th e absence of doctors.Health authorities hav e yet to be convinced that PHC services can be successfully provided and delivered by nurses, midwives and allied health professionals making up local teams with the relevant staffing complement and skills mix. [14] All publicly employed doctors are forbidden from practicing privately and many of them receive non practicing allowances as part of their non salary allowances under the law of the country, That notwithstanding, most of them run lucrative private sector clinics while working in hospitals and often use the public sector leverage to boost practices in private facility settings.A number of unethical practices such as refusing to see patients i n hospitals and referring them to private clinics are well established and are almost regarded as a conventional norm. Provider-driven over-consumption of health services, over-prescription, and over-use of diagnostics as well as violation of ethical guide lines in clinical practice are well established in Pakistan. In terms of the et hics of health care alone, frequent violations of the four basic principles of: the Right to autonomy, Right to privacy, Right to choose and Right to information are often seen. 17] High rate of frequent transfer and posting is also a major reason of low levels of performance in public health sector. A study was conducted on the 54 top provincial offices in the government of Sindh Department of Health over the period of 24 years (1981-2004). There were 689 transfers/postings made in the 54 key offices studied over the 24 year time period. Almost half (48. 9%) of these postings lasted no longer than 1 year. The offices affected highest were tertiary/district care hospitals (54 tim es) and district health offices (37 times) respectively. 18] Recommendation and priority actions towards Human resource development Since the Pakistan is enriched with human resources there is emerge need to develop strategy for optimum utilization of it especially in public heath sector. WHO reviewed the h ealth system of Pakistan and suggested that there is need to develop a clear policy and strategies for human resource development according to the longer term stated health development vision for Paki stan and to the more pressing requirements of improving health service delivery in the country .The report emphasize on mapping of health care providers and institutions through a national human resources for health (HRH) observatory, which should bring together all stake holders involved in human resource development. It suggested that to deal with standard setting and regulatory functions strategic planning in human resource development at federal and provincial levels is required. It reflected the essentiality to established position such as human resource planners, health economists, health information experts and health system managers, which are attractive enough to recruit qualified and experienced persons.In addition, tackle their shortage in the short term through external fel lowships and in the longer term through the development of accredited training programs in the country. A nursing directorate should be established in the MOH in order to strengthen leadership and to address the nursing crisis. There is need to review the role of the PM&DC, CPSP and other institutions in term of new developments and planned reforms. By providing problem based training the system can reorient the production of health workforce towards more focus on public health and community needs.In order to provide the necessary support to the various reforms aimed at increasing access to health services and at improving health system performance; strengthening of partner institutions such as Health Services Academy (HSA), schools of public health, academia and professional institutions is required. Human resource policy in government bureaucracies should be developed to stabilize professional positions while having a clear transfer policy in place and improve the performanc e of the health care delivery system. 15] Efficient and effective development of a health care system needs of equitable gender distribution of women in the health workforce. [19] To meet out such needs ministry of health, Pakistan came up with national health policy in July 2009 which recommended that Federal and health authorities will play a vital role for the development of the health resource in Pakistan. This federal and Provincial Health authorities will forecast human resource needs based on requirements outlined in essential health services package and provincial strategies.It will direct and facilitate the teaching institutions in reorienting their curricula and training t o being competency-based with enhanced exposure to the community and with responsiveness to the local needs and compliance with international standards. It includes that each district will be linked to a teaching institution so that the latter can provide technical support and supervision to the former to imp rove rural health care services.All medical graduates will be recommended to be posted to rural centers for a period of at least 6 months after graduation. The Pakistan Medical and Dental Council will ensure that those undergoing post graduate training also rotate through district health centers. Provincial health authorities will appoint and retain relevant cadres of appropriate health personnel with special focus on staffing district primary care outlets and on recruiting women.Provincial health departments will track human resources for health by establishing a database of doctors, nurses, midwives and allied health professionals working in the BHUs and RHCs across each province and those in training funded by the government. [14] Conclusion A healthy population is not only valued in its own right, but it also raises the human capital of a country thereby positively contributing to the economic and social development.A considerable improvement in health sector facilities over the past year is reflected in the existing vast network of health care facilities which consist of 4712 dispensaries, 5,336 basic health units, 924 hospitals, 906 maternal and child health centers and 288 TB centers. Available HR is 122798 doctors, 7388 dentist and 57646 nurses. [20] A major strength of health care services in Pakistan is very strong outreach via about 95,000 Lady Health Workers (LHWs) and an increasing number of community midwives (CMWs).Inspite of all there is a lack of clear long-term vision for human resource development, which is necessary to address the imbalances in health workforce with appropriate skills; and improved motivation, retention and productivity; Human resources in health care are not appropriately planned in Pakistan, with the result that there are more doctors than nurses and â€Å"brain drain†, along with other issues related to curriculum, quality of graduates and their continuing supervision.The service structure for health workers is po orly defined it, favors tenure over competence, largely ignores technical capacities and does not allow incentives or rewards for performance. The conduct of education for medical, nursing and related cadres is mostly conventional and does not utilize recent d evelopments in the field of medical education. There is no organized system for continuing medical education for any health providers who are also largely unsupervised and at times ill equipped with the skills to tackle emerging diseases.National Health Policy 2010 is include a vision for the role HRH strategy can play in helping to meet the country’s goals for improving health care services for all Pakistanis. In addition, the current HRH assessment will serve as evidence for a new HRH strategy to be dev eloped and implemented by the Ministry of Health. The national and provincial authorities will comprehensibly plan and forecast their human resource requirement for next 10 years according to the proposed services in t he respective areas and take robust short term and long term steps to achieve the balance in manpower. 6] Provincial health authorities will also develop, implement and maintain a database of health human resource, including the private sector. Nationwide campaigns will be launched to promote the permanent roles that nurse, midwives and allied health professionals may play in providing and delivering effective services to the public. By: – Mr. Vikas Jain References 1. Martinez J, Martineau T. Rethinking human resources: an agenda for the millennium. Healt h Policy and Planning 1998 2. The world health report 2006: working together for health .Geneva, World Health Organization, 2006. 3. Dr. Zareen Abbasi Assistant Professor Department of Public Administration University of Sindh, Jamshoro, Human Resource Management in Pakistan , The Elite Scientific Publications, Faisalabad, Pakistan, 2009 4. World Atlas . com [http://graphicmaps. com/webimage/countrys/asia/pk. htm] 5. http:// southasia. oneworld. net/todaysheadlines/healthcare-in-pakistan-too-expensive-to-afford 6. CCF Case study, establishing an HRH coordination process, Pakistan, page 1, 2 7. Siddiqi S, Haq IU, Ghaffar a, Akhtar T, Mahaini R.Pakistan's maternal and child health policy: analysis, lessons and the way forward. Health policy 2004; page 117-130. 8. Bhutta ZA, Ali N, Hyder A, Wajid A. â€Å"Perinatal & Newborn Care in Pakistan: Seeing the Unseen! † Maternal and Child health in Pakistan. Challenges And Opportunities: Edited by Zulfiqar A Bhutta. Ameena Saiyid, Oxford University Press 2004. 9. Narasimhan V, Brown H, Pablos-Mendez A, Adams O, Dussault G, Elzinga G, et al. Responding to the global human resources crises. The Lancet 2004; page 14 -72. 10. Martineau T, Martinez J.Human resources in the health sector: guidelines for appraisal and strategic development Brussels: European Commission, Directorate General for Development, â€Å"Health and Development Series† 1997. 11. Buc han J. What difference does (â€Å"good†) HRM make? Human Resources for Health 2004 12. Global atlas of the health workforce. Geneva, World Health Organization (http://www. who. int/globalatlas, accessed 12 December 2009). 13. Narasimhan V et al. Responding to the global human resources crisis. Lancet, 2004 14. National health policy 2009. Islamabad, Ministry of Health (final draft) (http://www. health. gov. pk, accessed 5 May 2010). 5. Report of the Health System Review Mission – Pakistan, World Health Organization United Nations Children Fund, Department for International Development, United Kingdom, The World Bank, February 19-28, 2007, Islamabad 16. Corruption in the health sector in Pakistan , Pakistan Health Policy forum 17. Abdul Hakeem Jokhio B. S. , Ph. D. Department of Community Health Sciences, Aga Khan University, H ealth System Managerial Staffing Patterns: Public Sector Experience From P akistan, 18. World Health Organization. World Health Report 2003-Sha ping the future. Geneva; 2003. 19. Pakistan Economic Survey, 2007

Working with people and organisations Essay Example | Topics and Well Written Essays - 250 words

Working with people and organisations - Essay Example In order for GSCC to maintain contact with both the users and providers of social services, they usually have a code of conduct for the workers. This interface is very beneficial because social care workers, employers and users are able to know their rights in the use of the service. A worker usually gets a guide during his or her practice. Therefore, he or she knows what is expected of him or her. Secondly, an employer gets to know what he is supposed to do to ensure that the social care that his employees provide is of high quality. Thirdly, the code also helps the public to be aware of the expected of a behavior of a social worker. Moreover, the public also gets to know how an employer should support his employees in carrying out their jobs (code of practice for social care workers). (Williams, 2009, pg 13) In the event whereby a social worker realizes that a colleague or an employer is contravening the codes of practice, he should report the case to the relevant authorities. Curr ently, GSCC refers to the reporting process as whistle blowing. However, before this body was set up there was he Aspect, which performed a similar function. Unfortunately, Aspect did not have the capacity to protect people who reported such scenarios against victimization.

Why developed countries should take in more refugees Outline

Why developed countries should take in more refugees - Outline Example They have better economies to take care of the needs of refugees such as security, food, shelter, water, health care, and other needs (Bamgbose, 2008)†¢Ã‚  Developed countries have better infrastructure and refugee screening measures that would sieve out refugees who are not genuine (Lim, 2013; Wade, 2011). †¢Ã‚  Developed countries have an ethical obligation to help the less fortunate persons in developing countries (Davies, 2008)†¢Ã‚  Reducing mortality rates among the victims (Elie, 2010)†¢Ã‚   They have fledged, proven refugee policies and internal institutions (Elie, 2010)Disadvantages However, refugees’ entering developed countries could cause;   †¢Ã‚  Overcrowding and poor sanitation (Elie, 2010)†¢Ã‚  Heightened insecurity due to idleness (Davies, 2008)†¢Ã‚  Developed countries taking in refugees are implementing short-term measures to the problem of refugees in the world as many people will develop a culture of dependence (Davies, 2 008; Elie, 2010)†¢Ã‚  Taking in more refugees would justify more hostilities because perpetrators would be buoyed by the fact that victims will eventually leave (Davies, 2008)†¢Ã‚  In light of this, developed countries should alleviate the problem by taking in more refugees because they are better placed to provide the basic needs whenever necessary. †¢Ã‚  Preventive measures such as peaceful conflict resolution mechanisms in unstable countries is important †¢Ã‚  Facilitating stronger governance institutions, mediation and arbitration processes are equally important.

Labor Market Research Paper Example | Topics and Well Written Essays - 1000 words

Labor Market - Research Paper Example This entry by Wal-Mart also causes a drop in retail income in the areas of operation (Weinswig & Tang, 2010). The entry of Wal-Mart into these new areas also means a drop in prices; hence, increasing the purchasing power of the customer because prices are reduced not only at Wal-Mart, but also in other stores. Therefore, the customer benefits the most. Low income families tend to benefit the most despite the fact that labor market cost may be also unfavorable. This paper will discuss the labor market from which Wal-Mart Stores obtain candidates for vacant positions in the company. It will also examine the levels of education required to prepare new workers obtained from this pool of positions in the company. The training needed for these new workers will also be looked at. When Wal-Mart opens any new store, it employs hundreds of workers. More frequently than not, the amount of people applying for jobs is usually over 20 times higher than the number of positions to be filled. I reali zed that the entry of Wal-Mart in most of these areas is not well received by the local people. Many have attempted to block Wal-Mart’s entry into their communities with a multitude of excuses. The main reason is that they cause low wages in the retail market something the management has refuted (Dreher & Dougherty, 2001). They contend that, in most of the areas where Wal-Mart operates, they have created several job opportunities for other business apart from their own. What these people forget is that if one is considering the retail section of each region, employees cannot move from one region to another and customers can only shop in their own region. This is enough justification for the entry of Wal-Mart into the local market in the retail division (Neumark, Zhang & Ciccarella, 2005). The labor demand in a certain retail sector is a derived demand, and; therefore, affected by a variety of factors in the market for retail services. With this in mind, Wal-Mart affects labor demand in the retail sector by sufficiently supplying retail services and adopting technology, which will change labor intensity in the retail sector. Training at Wal-Mart is an ongoing thing and it is an essential part of the company. Each employee starts with an in-depth personal orientation (Weinswig & Tang, 2010). They are initiated to the history and traditions of the company while highlighting the roles and responsibilities the employee will be taking on upon joining the company. After orientation is over, each department has its own specific and detailed training and development program that gives to the employee the knowledge skills and tools needed to succeed in the company. Each employee has to chart out their own career path and endeavor to accomplish their most ambitious goals. Wal-Mart also offers several training prospects to assist managers develop their leadership skills and progress through the company to ensure their teams are motivated and passionate in fulfillin g the company’s mission running. They offer a management training program referred to as Assistant Management Training (AMT), which is open to all employees of the firm based in the United States. A person needs to apply in order to be chosen so as to benefit from this course. Also, there is the Walton Institute, which provides an educational environment for Wal-Mart leaders from all over the world to stretch themselves and explore the

Designing a Grounded Embodied Mental Model Learning Environment Assignment

Designing a Grounded Embodied Mental Model Learning Environment - Assignment Example The paper contains answers to a number of questions in which the Grounded Embodied Mental model learning environment has been investigated. The topic chosen for the design of the learning environment is the mathematical branch called arithmetic. It was found that the GEMM learning environment can be very appropriate in helping the student to master the simple arithmetic procedures. Arithmetic involves counting and adding up of things as it happens to be applicable in many spheres of life. It is the oldest branch in mathematics. The grounded embodied learning environment is one that provides the student with the right objects to apply the lessons they learn. It should allow them to have physical manipulation of these objects as well as the use of gestures in learning. The content of learning gets meaning from the use of these physical objects. It is no longer based on concept visualization without seeing or handling anything. Gestures have a role they play in changing the knowledge of the child. This happens directly on the cognitive state of the child or indirectly by affecting the child’s communicative environment. Agents are also important in learning because they make the lesson more realistic. Examples include robots and video games which make learning more interesting and easy to master. Students are motivated by the GEMM since it is a more interesting way of learning that reduces boredom. Using gestures and manipulating physical objects in the learning environment is very entertaining and can increase motivation. ... ognitive learning environment is critical; to enable the student to use the other body senses such as touch in order to learn (Lakoff and   Rafael 200).   Description of the grounded environment and how it would make the content more meaningful The GEMM learning environment has physical objects that should be used by the students. It involves gestures which are expected to make understanding better than if they were not there. This is the main difference with the ordinary learning setting. The physical objects such as computers are expected to help the student to learn. The student manipulates these objects to create a better understanding of the abstract concepts being taught (Greeno, & Moore, 210). The arithmetic learning environment consists of a number of equipment and parts such as natural user interfaces. These are of two types thus; free interfaces and the touch use interfaces. In the touch use interface the user has to directly touch the device and a single touch could be appropriate such as the SMART Board or multi touch such as SMART iPhone, table, surface or iPad. Free form interfaces with gestures don’t need the user to handle the device like the kinect Microsoft project. The gestural controller and touch screen mechanics have 3 parts which are an actuator, comparator and sensor. Bodily rooted knowledge has perception processes that have an effect on conceptual thinking. Researchers in the area of embodiment and cognition discovered that there exists a compatibility effect between the physical state of a person and his mental state. Physical touch and movement enhance the learning of a student. When children involve their hands in learning they develop knowledge and brain connections through the movement. When children make use of compatible actions for

Not sure Essay Example | Topics and Well Written Essays - 1000 words - 2

Not sure - Essay Example This is based on the fact that it is the responsibility of leaders to protect and care for their subjects, failure to do so, they desist from becoming leaders. Laozi on the other hand believes on a cautious approach, insisting on taking a spiritual approach in problems of governance within a state (Raz, 91). Looking at these different approaches in their philosophical views, this paper analyzes their differences, similarities, and concludes by taking a position on which is the best form of Daoism. Laozi believes that it is impossible to see, hear, feel or name the Dao. He believes that Dao existed before the earth and heaven ever became, and it is the foundation of all laws operating under the sky, on earth, and amongst human beings. According to Laozi, Dao is impartial, and everyone is equal under it. It is the source of everything, and it can be found anywhere under the earth, on earth, at the sky, even in the heaven (Raz, 31). On this basis therefore, Dao is beyond word, descripti on or any form. This argument advocated by Lao, is similar to the argument advocated by Mencius. Mencius equates Dao, with destiny. According to Mencius, destiny is unseen, and natural, and no one can rebel against it, and succeed. To him, destiny shapes the life of mankind, and it is different from fate (Palmer, 31). Analyzing these sentiments closely, one would denote that destiny, according to Mencius existed before life, and it is a factor that shapes the life of mankind. These are similar arguments taken by Laozi, and on this note, there philosophical arguments are similar. Laozi and Mencius take a different approach in identifying the characteristics of human lives. They have different definitions of the aspect. For instance, Laozi denotes that human beings who identify with Dao are not selfish, because they put their self-interests as the last option. They are ignorant and non-attached to the conditions of their lives (Palmer, 29). This people do not discriminate any situatio n in their lives, and welcome anybody who wants to associate with them, without prejudicing or discriminating them. According to Laozi, an individual has so much, but he doesn’t need excess (Palmer, 63). He just needs what he can use for the moment. Laozi denotes that all human beings are ordinary; despite this they are still important and precious. On this note, they must endeavor to seek the Dao with passion and diligently. On this basis therefore, human beings who identify with Dao will manage to live in peace, in health, and in happiness. Mencius on the other hand believes in the class system, and categorizes people into gentlemen, and ordinary people (Raz, 93). He denotes that ordinary people can be influenced by material things, while gentlemen cannot be influenced by material things. Mencius believes that for leaders to rule, they must look for ways of satisfying the material needs of people. By doing this, they won’t live in fear of wars, or assassinations. Men cius believes that an individual does not need to be spiritual in order to achieve peace, happiness, harmony and health. To him it is a matter of good governance, and stable leadership that is centered on serving the people, and founded on a strong family values and backgrounds. For instance, Mencius believes that the family is a unit that measures the prosperity and stability of a state (Palmer, 28). To him, if a family is materially and physical successful, then the state will

Qualities of an Ideal Businessperson Essay Example | Topics and Well Written Essays - 750 words

Qualities of an Ideal Businessperson - Essay Example ern business environment requires business people to have certain qualities in order to overcome the stiff competition in the market (Naidu, 2009, p 151). An ideal businessperson must be persistent in exploiting the opportunities in the market, especially new and innovative ideas that present high business growth potential. The person should have good knowledge of all business processes such as procurement, financial management, marketing and customer relations management. In addition, one must be able to foster close working relationships with employees and ensure that individual employee efforts contribute to the overall attainment of the organizational objectives (Naidu, 2009, p 134). Thesis statement: an ideal businessperson must have an entrepreneurial attitude in order to succeed in the competitive business environment. According to Naidu (2009), it is essential for the person to have adequate technical knowledge of the business activities (p 89). The person should be aware of the customer needs, the attributes of the product and surrounding business environment. The ideal person must be able to scan the environment and identify trends in the business segments such as the opportunities that may foster business growth and profitability, and threats that can hinder the long-term survival and competitiveness of the business (Naidu, 2009, p 155). In addition, one must be aware of the internal business processes such as the marketing, manufacturing processes, financial management skills and supply chain management activities in order to ensure business activities are properly coordinated. For instance, businesspeople in the automobile industry must be knowledgeable about the different vehicle models, the manufacturer’s specifications, the current prices and changes in customer attitudes towards l ess fuel consuming vehicles (Naidu, 2009, p 169). Businesses require innovativeness and creativity due to rapid business environment changes such as new technology,

Childhood Obesity Research Paper Example | Topics and Well Written Essays - 750 words - 1

Childhood Obesity - Research Paper Example An experimental research conducted by Harris, Bargh and Brownell (2009) suggests that children and adolescents are more influenced by advertisements than adults. Authors carried out two experiments to evaluate the behaviors of both children and adults after watching television advertisements. The eating behaviors were analyzed and the results concluded that children’s junk food intake increased by 45% after advertisements. On the other hand, adults were more motivated to take healthy meals rather than junk food (Harris, et al., 2009). The group that is badly affected by media exposure, television programs and advertising campaigns are youngsters. Many researches and surveys are conducted to understand the effects of food, alcohol, smoking and general advertisements on children and their behaviors. The food advertisements lead to a great change in children’s food choices and intake (Hastings et al., 2003; IOM, 2006; Story & French, 2004). Other studies examining the corr elation and quasi-experiments reveal that more exposure to media leads to greater consumption of unhealthy dietary habits among children (IOM, 2006). Importance of the Problem of Childhood Obesity Obesity is the result of a number of factors; unhealthy dietary habits and food consumption patterns remain the most important of them. ... There is a strong relationship between unhealthy food advertisement and increasing obesity among children Lobstein & Dibb, 2005). On the other hand, Ebbeling, Pawlak & Ludwig (2002) also discuss the role of overeating due to High glycaemic index foods which end up producing a great increase in postprandial blood glucose concentrations and affect the appetite regulation. Fast food is considered as the root cause of adverse eating habits as it comprises all adverse dietary factors like saturated and trans fat, high glycaemic index, high energy density, and, increasingly, large portion size. Moreover, fast food is considered to have low amounts of fibre, micronutrients, and antioxidants which help in tackling the risk of cardiovascular disease and diabetes (Ebbeling, Pawlak & Ludwig, 2002). Method of data collection In order to carry out a qualitative analysis of the problem childhood obesity and the role of media (particularly of advertisements) on its prevalence, the research papers f rom various sources will been used. The journals of health, behavior and physical activity as well as reviews of important researches will be included in the research paper. Search engines that are used include Google and the online libraries including EbscoHost and Jstor are being used to gather information from credible journals. Preliminary Results Obesity is a disease state which is now turning into a matter of global concern because of the increase in the statistics associated with the pathology. This condition serves as an underlying cause for many degenerative diseases which include diabetes mellitus and diseases of the major organs systems of the body. Obesity is a condition which is not restricted to adults but it also affects a large number of children as well. This

The mechanisms that underlay the repairs of DNA damages Thesis

The mechanisms that underlay the repairs of DNA damages - Thesis Example Cytarabine is used in the treatment of acute cases of lymphomas and leukemia. The key mutants to be acted upon are deoxyribonucleoside kinase and deoxycytidine kinase. Using S. pombe provides a greater advantage as it can be easily manipulated both physically and genetically. It also helps to understand the DNA repair mechanism in higher eukaryotes. In its natural form, yeasts do not contain a particular transporter and the particular kinase used to phosphorylate nucleoside analogues. Therefore, in this project, the S. pombe in use is adapted in that it contains deoxynucleotide kinase (dmdHK) which is found in Drosophila melanogaster (fruit fly) and is important for their phosphorylation (the addition of a phosphate molecule on to a protein molecule or any other organic molecule). It also contains the human membrane transporter (hENTI) which allows the nucleoside analogue to directly interfere with the processes taking place within the cell. 2.1.0 Material used in the practical 2.1.1 S. pombe strains The S.pombe strains used in this practical are listed below: WT: h+ ura4-D18::adhdmdNK-NAT-adhhENT1 URA4aim Swi10: (h+ ura4-D18::adhdmdNK-NAT-adhhENT1 swi10::KanMX URA4aim) Removal of damage in nucleotide excision repair. exo1: (h+ ura4-D18::adhdmdNK-NAT-adhhENT1 exo1::URA) Removal of damage in mismatch repair. rhp14: (h+ ura4-D18::adhdmdNK-NAT-adhhENT1 rhp14:: KanMX URA4aim). Recognition of damage in the process of nucleotide excision repair. rad50: (h+ ura4-D18::adhdmdNK-NAT-adhhENT1 rad50:: KanMX URA4aim) of the MRN(Mre11,Rad50,Nbs1) complex, for repair of double strand breaks. rad32D65N: (h+ ura4-D18::adhdmdNK-NAT-adhhENT1 rad32D65N URA4aim). Mre11 nuclease dead, lacks the activity of Mre11 in double strand breaks repair. 2.1.2 Medias Liquid 2.1.2.1 EMM+Glut {(EMM broth without nitrogen 109.2 g + Glutamic acid 15g) liquid + Granulated agar 10g} solid . 2.1.3: Preparing Agarose gel: first PCR Procedure: 1. With the use tape, seal all the borders of a dry and cle an glass plate. This is important for forming mold. 2. Prepare 50ml 10X TBE (Tris-boric acid-EDTA) buffer for the preparation of the gel. 3. Add 0.8% of powdered Agarose to the TBE (Tris-boric acid-EDTA) buffer in an Erlenmeyer flask. The buffer should occupy less than 50% of the total flask volume. 4. Heat the solution in a water bath or a microwave oven to facilitate the dissolving of all the Agarose grains. During the heating process, part of the buffer will evaporate. As such it is important to add more buffer solution in order to return the solution to the original volume. 5. After heating, cool the solution to 60Â °C and immerse the solution in an ethidium bromide solution once the gel solidifies. Ethidium bromide helps to intercalate DNA thus making it visible under ultra violet light. 6. Place the comb 1.0 mm above the place consequently allowing for the formation of a complete well once the Agarose solidifies. It is important to avoid air bubbles that may form between or u nder the teeth of the comb. Seal the plate with small quantities of the Agarose solution through a Pasteur pipette. Once the plate is sealed, transfer the gel in to the glass plate. It is important to swirl the gel in the flask to ensure uniformity in the temperature before pouring it out into the plate to prevent the gel for hardening unevenly. 7. The gel is expected to have

Technological Innovation Impact on Accounting Field Essay Example for Free

Technological Innovation Impact on Accounting Field Essay Technology innovation is the process through which new (or improved) technologies are developed and brought into widespread use. Innovation can be composed of research, development, demonstration, and deployment. Although it is known clearly that innovation is not a linear process there are various interconnections and feedback loops between these stages, and often even the stages themselves cannot be significantly disaggregated. I don’t think if the phenomenon of technological innovation can become a stumbling block in prosperity of management accounting since through innovation management accounting discipline and career have been significantly improved. These areas are as follows The Information Revolution: in early years it was cost fully to collect, analyses and store accounting information. This was because of inadequacy of infrastructures which were importantly needed for this purpose. Today information technology makes possible sophisticated database accounting systems that are both powerful and flexible in terms of the accounting information that they can collect, organize and report. Even today, however, the cost of designing, implementing, and running cost accounting systems is a substantial obstacle in many organizations; a fact probably underrepresented in business schools. Proliferation of Product Lines: This is not much matters if a company makes only one product, since many cost accounting issues can be resolved. When companies significantly expanded their product lines to gain market share and increase profits, the difficulty and importance of obtaining accurate cost information on individual products increased. Back then companies were allocating costs among products in a manner that led to poor production and marketing decisions. A management accounting tool called activity-based costing was developed to help correct this problem, by improving the accuracy with which costs are allocated among products. Globalization of the Economy: Globalization has several implications for management accounting. First, globalization has resulted in a more competitive environment, which encourages the implementation of accounting systems that provide the most accurate, relevant, and timely information possible. Second, the growth of multinational corporations has increased the importance of transfer pricing. A transfer price is the amount one division of a company charges another division for an intermediate product. Transfer pricing plays a role in taxation, international trade negotiations, and production and marketing decisions within decentralized firms. Finally, globalization has increased the pace of change within the management accounting profession. Many recent innovations in management accounting, as well as in the fields of strategy and operations management, originated in Japan. Direct competition between Japanese and U. S. companies has led many U. S. companies to adopt these Japanese management practices. Innovative Management Practices: In addition to the four economic and technological trends described above, the following three innovations in the fields of strategy and operations management have influenced management accounting systems and practices over the past several decades. Total quality management (TQM): Quality programs go by several names, including TQM, zero defect programs, and six sigma programs. The focus on quality has had a significant impact on many organizations in all sectors of the economy, beginning with the automobile industry and some other industries in the manufacturing sector of the economy about forty years ago. Sophisticated quality programs are found today in many areas of government, education and other not-for-profit organizations as well as in for-profit businesses. The impetus for TQM programs is the assessment that the cost of defects is greater than the cost of implementing the TQM program. Advocates of TQM claim that some costs of defects have been underestimated historically, particularly the loss of customer goodwill and future sales when a defective unit is sold. Some advocates of quality programs believe that the most cost-effective approach to quality is to eliminate all defects at the point at which they occur. If successful, these â€Å"zero defect† programs would not only result in higher levels of customer satisfaction, but would also eliminate costs associated with more conventional quality control procedures, such as inspection costs that occur at the end of the production line, the cost of reworking units identified as defective, and costs associated with processing customer returns. The focus is on preventive controls to prevent the defect from occurring in the first place, as opposed to detective controls to identify and correct the defect after it has occurred. Just-in-time (JIT): During the last two decades of the 20th century, many companies implemented just-in-time programs designed to minimize the amount of inventory on hand. These companies identified significant benefits from reducing all types of inventories—raw materials, work-in-process, and finished goods—to the lowest possible levels. These benefits consist principally of reduced inventory holding costs (such as financing and warehousing costs), reduced losses due to inventory obsolescence, and more effective quality control The relationship between JIT and TQM is important. Many defects in raw materials or the production process can be ignored indefinitely if high-quality materials can be substituted for defective materials, and if additional first-quality units can be produced to replace defective units. In a non-JIT environment, defective materials and half-finished units might be set aside in a corner of the factory. However, under a JIT program, if raw materials received at the factory are defective, there might be no first-quality materials on hand to substitute for the defective materials. In extreme cases, the production line might be shut down until first-quality materials are received. Hence, a JIT program can focus attention on quality control in ways not generally possible in a non-JIT environment. The challenge in a JIT environment is to avoid stock-outs. To meet this challenge, some companies have found ways to decrease production lead times. Shorter production schedules result in less work-in-process inventory, and also allows companies to maintain lower levels of finished goods inventory while still maintaining high levels of customer satisfaction. Early in the 21st century, acts of terrorism (such as the destruction of the World Trade Center in New York City) and natural disasters (such as Hurricane Katrina) prompted some companies to rethink the practice of maintaining extremely low levels of inventories. These companies are concerned that future incidents could result in the disruption of inventory pipelines, particularly for imported materials. Consequently, the advantage of maintaining safety stocks of inventory is receiving renewed interest.

Forecasting And Procurement At Le Club Fran Ais Du Vin Finance Essay

Forecasting And Procurement At Le Club Fran Ais Du Vin Finance Essay Le Club Franà §ais du Vin is founded in 1973 and had grown to a 10 million Euro per year business in 2004. The mission of Le Club is to offer wines of good to very good quality to its customers in France, Switzerland, and Germany, who receive interesting wines delivered directly to their homes. Every member of Le Club receives an offer of wine every two months via a catalog. Le Club Franà §ais du Vin largely carries French wines. The heterogeneity of French wines makes forecasting consumer demand for particular French wine extremely difficult. At Le Club Franà §ais du Vin, a group of professional wine experts create a sales forecast for each wine in the upcoming catalog taking into account both taste considerations and the season of the year in which the wine is offered in the catalog. Once the forecasting process is over, Le Club places an order with the wine grower, which happens months before publishing the catalog and at a point when little information beyond the wine experts personal opinions is available. The Club pays the wine grower 75 days after having received the shipment. If the wine forecast equals the actual demand or comes close to it these payment conditions are very favorable for Le Club. However, such desirable cash flows are not always the case. If Le Club has over forecasted sales for the catalog season, excess bottles are stored in the warehouse and are likely to be discounted in a future catalog (white wines are discounted by 40% of their retail price, and red wines by 30%). There is also an additional handling and shipping cost for discounted bottles of 1.25 Euro per bottle, and 0.10 Euro warehouse operational costs per bottle. The main problem of the company is the mismatch between forecasts and actual customer demand, which results in either excess inventory or unsatisfied customers. For example, the Club had ordered 10,000 bottles of the 2002 St Emilion wine for the companys January 2004 catalog, but only sold 1,704 bottles. On the other side, the Club forecasted to sell 10,000 bottles of the Cà ´tes du Rhà ´ne, but actually experienced a demand of over 11,000 bottles. The Club currently holds over 200,000 bottles of wine in its warehouse. The company has to choose between few options in order to decide how many bottles of each wine to order to maximize expected profit, to generate a certain fill-rate or to achieve a certain in-stock probability. If the manager chooses as an objective to maximize the expected profit, as seen in Exhibit 1, the total expected profit is supposed to be 147,998 Euro. However, the profit-maximizing order quantity may generate some unacceptable fill rate and in-stock probability from the firms customer service prospective. The fill rate varies in the range of 50% to 100%, while the stockout probability varies in the range of 0% to 83%. This scenario will result in a lot of unsatisfied customers who might choose a different supplier in the future. The customers of the Club place their order by mail, phone, fax, or over the internet. If the customers place their order by phone or online they can be informed right away if a particular wine is out of stock. However, as a large portion of Le Clubs customers are in their 60s, orders by mail are most common, and these customers are unaware of the availability of the wine there are ordering. It is very rare for the company to be able to place additional orders for wines that have been under forecasted. As a result all demand for a wine that remains unfulfilled is lost. Given the complications associated with stock-outs, Le Club aims at high availability for its wines throughout the catalog season. That is the reason why the first scenario is not suitable for the company. Let us assume that the company chooses to guarantee a fill rate of 99%, which means that 99% of the demand will be satisfied. As seen in Exhibit 2, the total expected profit is 102,382 , which is about 45, 000 euro less than the profit it generates in the first scenario, however, the in -stock probability is 94.74%. This is a better scenario for the Club, because it is going to guarantee that most of the customers during the season can be satisfied, and there is also a great probability that the customers demand can be satisfied even at the end of the season. The fill rate is a good measure of average customer service because it treats each customer as equally important. So, even though the company might experience some profit loss for certain types of wine, the total expected profit is 102,382 Euro, and along with that the Club can also achieve high levels of fill rate and in-stock probability. The third option for the club is to choose to set as its primary goal to achieve a high in-stock probability (let us assume 97.5% rate). As seen in Exhibit 3, in this case the total expected profit is only 88,138 Euro, which is almost half of the expected profit in the first scenario. The fill rate is 99.57%. We see that achieving a very high in-stock probability can be quite expensive and sets the company at a much lower profit level. This scenario is also unacceptable for the company. The company has to constantly try to balance the cash constraints inherent in holding large inventory positions with the goal of sustaining healthy margins (the club typically enjoys around 50%) while ensuring availability of a broad selection of wines even late in a catalog season. Therefore the club needs to make tradeoff to give up some of its profit in order to obtain higher fill rate and in-stock probability in order to ensure better customer service and to keep its positions in the market. The second scenario seems the most optimistic and optimal for the company it will lose some of its profit, but on the other side will guarantee a greater customer satisfaction, which is very important for the Club that capitalizes on a niche market. Appellation Q that maximizes expected profit Expected profit Fill Rate Stockout probability FAUGERES 12022 16235 88.47% 36.58% GRAVES 803 1847 91.12% 30.32% GRAVES 1149 2076 93.58% 23.77% PESSAC LEOGNAN 3241 11721 100.00% 0.00% CARTON PANACHE 6+2+4 5093 12880 99.38% 3.40% BORDEAUX CLAIRET 3461 3286 81.65% 50.00% CÔTES DE BOURG 1352 1985 90.00% 33.05% ENTRE DEUX MERS 1129 940 74.41% 61.14% BORDEAUX 4535 3063 74.63% 60.84% CARTON PANACHE 5493 5993 84.41% 44.98% Bordeaux 2127 1332 73.05% 62.96% VDP des Cà ´teaux de LArdà ¨che 1651 344 50.59% 83.87% VDP des Cà ´teaux de LArdà ¨che 1412 318 52.08% 82.91% VDP du Comtà © Tolosan 1041 227 48.72% 85.02% CARTON PANACHEE 1692 547 59.22% 77.54% CABERNET DANJOU 2630 2581 82.31% 48.84% SANCERRE 2092 6068 93.93% 22.76% CHINON 4071 4315 83.84% 46.05% ALOXE CORTON 2992 13549 100.00% 0.00% BOURGOGNE ALIGOTE 1013 1505 84.68% 44.44% GIVRY 1734 4028 99.95% 0.38% COTEAUX DU LYONNAIS 2543 2293 80.61% 51.78% CDR Vill RASTEAU 1075 2084 94.73% 20.40% GIGONDAS 2493 5225 100.00% 0.00% CÔTES DU VENTOUX 1052 1032 82.31% 48.84% CARTON PANACHE 3742 7788 95.87% 16.85% CORBIERES (6) 1155 1169 82.94% 47.71% GAILLAC 2248 2347 83.54% 46.60% MINERVOIS 3322 2847 79.57% 53.48% MADIRAN 14445 28372 94.95% 19.75% Total Expected Profit 147,998 Exhibit 1 Appellation Q that guarantees fill rate of 99% Expected sales Expected leftover inventory2 Expected profit (fill rate = 99%) In-stock probability FAUGERES 18121 10280 7841 12379 94.74% GRAVES 1133 642 490 1588 94.74% GRAVES 1510 857 653 1926 94.74% PESSAC LEOGNAN 1963 1114 849 10134 94.74% CARTON PANACHE 6+2+4 4832 2741 2091 12871 94.74% BORDEAUX CLAIRET 6040 3427 2614 1219 94.74% CÔTES DE BOURG 1963 1114 849 1632 94.74% ENTRE DEUX MERS 2265 1285 980 -341 94.74% BORDEAUX 9060 5140 3920 -1022 94.74% CARTON PANACHE 9060 5140 3920 3338 94.74% Bordeaux 4379 2484 1895 -737 94.74% VDP des Cà ´teaux de LArdà ¨che 5285 2998 2287 -3335 94.74% VDP des Cà ´teaux de LArdà ¨che 4379 2484 1895 -2682 94.74% VDP du Comtà © Tolosan 3473 1970 1503 -2623 94.74% CARTON PANACHEE 4530 2570 1960 -2289 94.74% CABERNET DANJOU 4530 2570 1960 1082 94.74% SANCERRE 2718 1542 1176 5678 94.74% CHINON 6795 3855 2940 2252 94.74% ALOXE CORTON 1812 1028 784 11367 94.74% BOURGOGNE ALIGOTE 1661 942 719 863 94.74% GIVRY 1359 771 588 3997 94.74% COTEAUX DU LYONNAIS 4530 2570 1960 663 94.74% CDR Vill RASTEAU 1359 771 588 1985 94.74% GIGONDAS 1510 857 653 5001 94.74% CÔTES DU VENTOUX 1812 1028 784 433 94.74% CARTON PANACHE 4530 2570 1960 7572 94.74% CORBIERES (6) 1963 1114 849 542 94.74% GAILLAC 3775 2142 1634 1181 94.74% MINERVOIS 6040 3427 2614 571 94.74% MADIRAN 18121 10280 7841 27136 94.74% Total Expected Profit 102,382 Exhibit 2 Appellation Q that guarantees In-stock probability = 97.5% Expected profit(in-stock probability = 97.5) Expected fill rate FAUGERES 19745 10565 99.57% GRAVES 1234 1444 99.57% GRAVES 1645 1820 99.57% PESSAC LEOGNAN 2139 10387 99.57% CARTON PANACHE 6+2+4 5265 12876 99.57% BORDEAUX CLAIRET 6582 466 99.57% CÔTES DE BOURG 2139 1450 99.57% ENTRE DEUX MERS 2468 -739 99.57% BORDEAUX 9872 -2297 99.57% CARTON PANACHE 9872 2286 99.57% Bordeaux 4772 -1366 99.57% VDP des Cà ´teaux de LArdà ¨che 5759 -4219 99.57% VDP des Cà ´teaux de LArdà ¨che 4772 -3410 99.57% VDP du Comtà © Tolosan 3784 -3300 99.57% CARTON PANACHEE 4936 -3017 99.57% CABERNET DANJOU 4936 526 99.57% SANCERRE 2962 5391 99.57% CHINON 7404 1450 99.57% ALOXE CORTON 1974 11703 99.57% BOURGOGNE ALIGOTE 1810 606 99.57% GIVRY 1481 4018 99.57% COTEAUX DU LYONNAIS 4936 85 99.57% CDR Vill RASTEAU 1481 1903 99.57% GIGONDAS 1645 5052 99.57% CÔTES DU VENTOUX 1974 210 99.57% CARTON PANACHE 4936 7347 99.57% CORBIERES (6) 2139 304 99.57% GAILLAC 4113 732 99.57% MINERVOIS 6582 -215 99.57% MADIRAN 19745 26076 99.57% Total Expected Profit 88,138   Exhibit 3

Three-Dimensional Grade Control in Road Construction

Three-Dimensional Grade Control in Road Construction Three-Dimensional Grade Control in Road Construction using Unmanned Aerial Vehicle Introduction Contractors have used grade stakes installed on the side of the road at intervals of 100 feet for the vertical grade of the finished ground surface in road construction. The grade stakes are measured based on control points(CPs) which are reference points and markers established by surveyors at the design phase. By using the grade stakes, the contractors align the grade elevation with regulated tolerances which are typically less than 0.05 feet for subgrade and 0.02 feet for roadway surface (Missouri Highways and Transportation Commission 2016). The contractors confirm the final construction layout including as-built cross sections, which are measured by a total station or conventional survey methods such as a level, theodolite, and transit at intervals of 500 feet. The final products should be in reasonably close conformity with the design plans and specifications (Floyd et al. 2013). Figure 1: The conventional grade control using grade stakes (Missouri Highways and Transportation Commission 2016) However, in many cases, the contractors have experienced unsuspected discrepancies between the as-designed model and the as-built model, which cause the project cost and time overrun (Pitman 2001). These discordances could be derived from technical issues or human matters that are issues among people such as a lack of coordination and communication between designers and contractors (Arain et al. 2004). While the problems caused by human issues could be solved easily by involving the contractors and designers as coordinators, the resolving the technical problems, such as a measurement error, still remain challenges because the conventional grade control methods use only a few points to build a final grade layout, which can cause considerable errors at the non-measured area. For this reason, many researchers have studied on the application of new technologies such as a global positioning system (GPS), robotic total station (RTS), and terrestrial laser scanning (TLS) to obtain dense poi nts for the grade control. Despite all these efforts, the contractors are still using the traditional methods for grade control because of the disadvantages of the new approaches regarding the economic and usability. In this regard, unmanned aerial vehicle (UAV) is the most reasonable way to overcome such shortcomings (Nex and Remondino 2014). The photogrammetry using UAV is a time-competitive method to generate a digital surface model (DSM) which enables contractors to obtain the dense point cloud of the long-strip roadway construction site without intervals (Chiabrando et al. 2009). Moreover, the UAV allows the user to avoid working in hazardous environments (Barry and Coakley 2013). With such advantages, several researchers apply the UAV to roadway construction, especially for surveying earthwork projects (Siebert and Teizer 2014). The current accuracy of the UAV photogrammetry, however, does not completely meet the particular requirements in road construction such as the grading tolerance which is less than 0.05 feet. This study, therefore, reviews the current state of the three-dimensional grade control in road construction and presents a best practice for applying the UAV for the construction by providing a way to develop the accuracy of the UAV photogrammetry. Moreover, this study verifies the improved accuracy through the field test at an ongoing highway construction site in Georgia, the United States. Literature Review This study has reviewed current studies on the 1) grade control methods in road construction using dense point clouds, 2) applications of UAV for highway construction, and 3) accuracy of UAV photogrammetry. Current study on the grade control in roadway construction As mentioned above, the contractors today perform the grade control in a conventional manner using grade stakes and cross sections because those methods dont require a specialty. However, such methods are conducted sparsely at regular but widely spaced intervals, which can give rise to substantial errors when the contractors build a successive three-dimensional as-built model. To avoid this, many researchers have studied on the way to create a 3D as-built model without intervals as below. 3D grade control using GPS installed on the construction equipment The real-time kinematic (RTK) GPS technology provides a location information for a dynamic motion in real time. The advent of the RTK-GPS technology enables the users to control the machines blade systemically and to build 3D as-built model automatically (Stewart, 2006). For this reason, many global GPS manufacturers, such as Topcon, Trimble, and Leica, present automatic 3D grade control technologies as seen in Figure 2. According to a final report on Implementation of GPS Controlled Highway Construction Equipment in the University of Wisconsin, the use of the GPS to guide construction equipment is time-efficient and cuts costs (Vonderohe 2007). Figure 2: GPS controlled roadway construction equipment Accordingly, many Department of Transportation (DOT) have increased the implementation of the automated machine guidance with GPS (Townes 2013). However, the vertical error of RTK-GPS is typically over 1.5 inches, and sometimes a sudden elevation shift caused by a cycle slip or multipath, which can lead to a significant discrepancy between as-design model and as-built model. Therefore, its impossible to fully adopt the GPS to grade control in roadway construction unless there is an enhancement of the accuracy. Terrestrial laser scanning (TLS) for the highway construction process monitoring The TLS, which measures the location of thousands of points each epoch at ranges of hundreds of meters, is another method to collect high dense point data. The TLS generates more accurate 3D layouts than conventional survey methods (Slattery and Slattery 2013). D. Slattery et al. (2010) demonstrate that the TLS is a feasible means to control the grade in highway construction projects and to calculate earthwork quantities (Slattery and Slattery 2010). Despite the fact that the TLS guarantees accurate point clouds, this new technology faces several operational challenges. One of the primary challenges is that it takes extremely long time to acquire the dense points. In general, the measurement using TLS takes one hour to measure the area of 20,000 square feet. Furthermore, as the scanner is installed on the ground, TLS method forms shadow zones where cannot scan due to obstacles such as trees and hills. In particular, since the roadway construction site is quite long, such drawbacks co uld be fatal. In this regard, the UAV, which is a less time-consuming way of measuring fields, could be an effective alternative. Application of UAV for roadway construction The UAV referred to as a drone, has recently begun to be applied to the construction field with the improvement of the positioning technologies and high-performance digital camera (Turner et al. 2012). With the development of the high-performance UAV, many researchers have successfully applied the UAV for the 3D modeling of the construction site and the measurement of earthwork quantities. S. Siebert and J. Teizer (2014) presents a practice for the application of UAV to construction survey for earthmoving of the construction site. They assert that the UAV technology is a cost- and time-effective alternatives to ground-based survey applications (Siebert and Teizer 2014). Furthermore, M. Daakir et al. (2015) describe that the UAV equipped with GPS receiver can achieve a consistent 3D model with a relatively low cost (Daakir et al. 2015). The studies on the application of the UAV has been limited to the particular construction fields such as earthmoving project and field survey for plan ning the road construction because the accuracy of the photogrammetry using UAV is over two inches which exceed the tolerance for the vertical grade. Thus, the improvement of the accuracy of UAV photogrammetry is required prior to applying the UAV technology to the grade control in roadway construction. Figure 3: The developed UAV systems, S. Siebert and J. Teizer (left), M. Daakir et al. (right) Accuracy of UAV photogrammetry Several researchers have examined innovative ways of improving the accuracy of the UAV photogrammetry. The accuracy of the UAV photogrammetry directly depends on the ground sampling distance (GSD), which is determined by the focal length, flight altitude, and resolution of the camera. In general, higher GSD value indicates that the image would have a lower spatial resolution. Therefore, the altitude of the flight should be performed around 150 m above ground level to obtain images at the GSD of up to 10 cm. (RuzgienÄ- et al. 2015). In addition, the use of geo-referencing methods aligning UAV imagery with known points measured in advance also can improve the accuracy of the photogrammetry. J. Goncalves and R. Henriques (2015) assert that the vertical root mean square (RMS) errors of UAV photogrammetry can be decreased to 5cm by using ground control points (GCPs) as the geo-referencing (Gonà §alves and Henriques 2015). However, a minimum of three GCPs are required for the geo-refe rencing, and generally, more than nine GCPs should be appeared on the imagery to retain redundancy for least squares regression. Moreover, the method that aligns the imagery known as Image registration causes a systematic error which is a cumulative error. In particular, since the road construction site requires extremely long longitudinal measurement, the registration error is theoretically increased in direct proportion to the length of the construction site (Zheng et al. 2016). This study, therefore, proposed a method to correct the systemic error by originating the position of the flying UAV with dual-frequency RTK-GPS and resection method. Figure 4: The GCPs that J. Goncalves and R. Henriques (2015) used Methodology This chapter enumerates the methodology for applying the UAV photogrammetry to the grade control in road construction as follows. Type of UAVs Ground Sampling Distance (GSD) Ground Control Points (GCPs) Positioning of the UAV using space resection method 3D model generation Verification Types of UAV The type of UAVs is classified into three categories: fixed wing type, rotary wing type, and hybrid wing type integrated the fixed wing and rotary type. Fixed wing UAVs have characteristics that they have a simple mechanism and more efficient aerodynamics which allows the fixed wing UAV to fly longer duration at higher speeds than the rotary wing. On the contrary, the rotary wing UAVs have a relatively more complicated structure which may infer that they have lower speed and shorter flight range than fixed wing. The advantages of the rotary wing are that they can conduct vertical takeoff and landing (VTOL) and hovering. The fixed/rotary hybrid UAV has both characteristics of the fixed wing type and rotary wing type. The hybrid UAVs can perform VTOL and hovering and fly with little power like the fixed wing UAV. Table 1 shows the differences between the fixed wing and rotary drones. Since the roadway construction site is quite long and doesnt have vertical obstacles, the fixed wing ty pe of UAV is most appropriate for the surveying the road construction area. Most UAV for the land survey is equipped with single frequency GPS receiver for positioning of the flying vehicle. In general, the vertical accuracy of the single frequency GPS is compromised. For this reason, this study suggests mounting a dual frequency GPS on the UAV to improve their positioning accuracy. The vertical accuracy of the dual frequency RTK-GPS is known to be lower than 2cm in general circumstances. This study might use virtual reference station (VRS), which facilitate the RTK/GPS based on National Continuously Operating Reference Station (CORS). Table 1 The differences between fixed wing type and rotary type Fixed wing Rotary wing Purpose Mapping Small area Mapping Inspection Application Land surveying (rural) GIS Construction Inspection Real estate Surveying (urban) Flight Speed High Low Coverage Large Small Flight Duration Times Long Short Wind Resistance High Low VTOL X O Hovering X O Ground Sampling Distance (GSD) As mentioned above, GSD value is related to the flight level, focal length, and resolution of the camera. Since the GSD value directly affects the results of the photogrammetry, it is important to determine the flight altitude. For a given flying height H, the GSD will be given by Where f is the lens focal length, and H is the flight altitude. Typically, in the case of the GSD of 5 cm, the standard deviation of 1 pixel in the parallax may result in a standard deviation of approximately 5 ~ 10 cm in the elevation error. The flight altitude also affects the overlapping rate which is related to the accuracy of the photogrammetry. That is to say, for a given focal length and resolution of the camera, increasing the altitude will increase overlap rate and GSD. Since it is possible to fly the UAV at low altitude in roadway construction site where is a barrier-free area, this study limits the flight height to 100 m or less to maintain the GSD of under 5cm. Although flying at low altitude can cause little overlap rate, the matter of overlapping can be solved by taking more pictures. Ground Control Points (GCPs) In the photogrammetry for field surveying, establishing a network of the ground control points The GCPs installed on the field is employed for the geo-referencing. Although the bundle image adjustment needs to have at least three GCPs, it is necessary to have 9 or more GCPs for providing enough redundancies for the least square adjustment. The GCP photogrammetric targets should be visible in the pictures and have about 5 ~ 10 times the dimensions of the GSD. Since the accuracy of the GCPs is crucial for the accuracy of the final results, the position of the GCPs should be measured precisely by total station or post-processing GPS. M.Chahbazi et al. (2015) state that although a large number of well-distributed GCPs as seen in Figure 5 (left) guarantees the highest accuracy, if it is impossible due to the field conditions, the best practice is to install the GCPs near the ends of the flight strips to be visible in several images from two closest strips. Furthermore, placing the GCPs with height variation is beneficial for the vertical adjustment of the UAV imagery. Figure 5: The methods to set up the GCPs in the article of M.Chahbazi et al. (2015) (left) when there are enough GCPs, and (right) if not. According to the construction survey manual of U.S. Department of Transportation (DOT), contractors or sub-contractors should establish control points (CPs), which are semi-permanent reference points built beside the construction site at intervals of 500 feet, to align the horizontal distribution and vertical elevation. Since these CPs are measured from the second-order benchmark, which has a ratio of closure of 1:10000, it is possible to construct accurate GCPs. Positioning of the UAV using space resection method The position of flying UAV has been determined from the GPS embedded on the UAV until now. However, the accuracy of the GPS depends on the satellite signal which sometimes includes serious errors such as cycle slip or multipath caused by the environmental conditions. Moreover, time synchronization between the GPS and images from the Camera can also cause several errors. In this regard, this study proposes a new positioning method that improves the accuracy of the photogrammetric results by applying space resection method. The resection method is to determine an unknown point from two known points. This measurement method is usually used when measuring the location of the device such as total station or theodolite. Figure 7: The concept of the space resection for UAV photogrammetry (Ref. https://dronemapper.com/uas_photo-grammetry_processing) The space resection requires at least two known ground control points per an image, but this study used five ground control points for the least square adjustment. The accuracy of the space resection only depends on the range error of the camera, which is much more accurate than RTK-GPS, and therefore this study expects an improvement in the positioning accuracy of the operating UAV As-built 3D model generation The stereo images extracted from UAV photogrammetry go through the image matching process. The image matching process is usually classified into correlation based method and feature-based method. The correlation based method has various computational processes because they conduct the image matching with all area and pixels. In contrast, since the feature based method adjusts images with edges or corners in the pictures, the processing is faster than the correlation based method. Scale-invariant feature transform (SIFT) is one of the most widely used features detecting method. The SIFT algorithm extracts key points from overlapped area, and align the images by using descriptors which are created from the extracted key points. The 3D structure is built by structure from motion (SfM) algorithm, which is a method to generate 3D structure by calculating the pose of the camera from 2D images. Most commercial software today has used the feature-based image matching and SfM algorithm to cre ate a 3D model. One of the commercial software is Agisoft PhotoScan which conduct image matching with the feature-based method. This study generates the as-built model of the roadway construction site based on the DSM generated from the Agisoft PhotoScan. The final as-built 3D model would be compared to the as-design model. An essential issue in this step is to synchronize the coordinates system used in both as-design model and as-built model. For this reason, it is essential that both models should be on the geographic information system (GIS) based on a global coordinate system. Verification Table 2 The whole process of this study Step 1 Step 2 Step 3 Step 4 Step5 Objectives Planning UAV operation Establishing GCPs Obtaining images from UAV Generating 3D model Verification Details GSD Flight Altitude Overlapping rate The number Location Resection QC of images SIFT, SfM DSM Field Test Error Assessment

Nixons Secret Bombings in Cambodia :: President Richard Nixon

Why did President Richard Nixon decide to have secret bombing in Cambodia in 1969? A. Plan of the investigation: i. Subject of the investigation: Why did President Richard Nixon decide to have secret bombing in Cambodia in 1969? The purpose of investigating Nixon?s secret bombing of Cambodia is to understand his real intentions. Also, to find out why he had to hide this from the Congress and the media. Wouldn?t it mean that he is abusing his power by keeping it a secret and not getting permission to do so from the Congress? Last, but not least, is to understand how Nixon actually destroyed neutral Cambodia. ii. Methods: a. Evidences from the biographical books on Nixon and Henry Kissinger will be used to support my thesis and topic question. b. The internet will be another source to find out information on the backgrounds of Cambodia and the events that were happening during the period when Cambodia was secretly bombed. c. Research for real conversations that Nixon had with his other helping mates about the decision to secretly bomb Cambodia. d. Find out the real issue he had that led him to secretly bomb Cambodia. Especially when he did not get permission from the Congress, and when the public found out, how did they react to Nixon?s actions. B. Summary of Evidence: -George McGovern wrote, ?The secret, unconstitutional bombing of [Cambodia] was the clearest ground for a Nixon impeachment. It was a vastly more serious crime than the break-in at Watergate.?# - ?In 1973, after the bombing was finally discovered, both Nixon and Kissinger maintained?that the secrecy was necessary to protect Sihanouk, who was variously described as? ?allowing? the raids, so long as they were covert. They maintained that the areas were unpopulated and that only Vietnamese Communist troops, legitimate targets, were there.?# -Nixon had already known that the American ground offensive, from the summer of 1966 to the Tet offensive of 1968, had failed to destroy the North Vietnamese (communists). Therefore he had an offensive against the Ho Chi Minh Trail in Cambodia. The Communists were making an effective use of the Ho Chi Minh Trail through Cambodia. Suddenly, Nixon ordered the bombing of the Cambodian sanctuaries. His instincts were to respond violently to the Communist offensive.

Who Is God? Essay -- essays research papers

Who is God? Worshipping is a way to communicate beliefs and feelings of individuals and religious communities. Every society I have every studied from the American Indians to the Ancient Greek have all believed in some form of worship or religion. Altars have been and are in existence in several if not all forms of region. Robert Farris Thompson depicts this for the African population in " Overture: The Concept 'Altar,' " and " With the Assurance of Infinity: Yoruba Atlantic Altars," Face of the Gods: Art and Altars of Africa and the African Americas, through pictures he and others have taken, has well as evidence from assorted books, articles, poems and songs, Thompson shows the meaningful role the Altar had in self expression of the Africans. "The aim is to view black Atlantic art, especially in the New World, in terms of thoughtfully selected [altar] objects belonging to specific philosophic constellations which help to define the face of divinity." Through the oppression of the salve trade, the Yoruba Africans worked to keep there own conception of region intact. "Even under slavery, and under post slavery persecution in the late nineteenth century, the Yoruba of Cuba and Brazil managed to maintain sporadic but precious contact with Africa through networks of friends and traders. They sought the sacred cowries, seeds, and beads of Africa for their religion." This example...

Bullet Proof Vests

The product bullet proof vest is under the manufacturing medical supplies and devices industry which has a total of about 11,000 companies under its umbrella, earning an aggregate income of $75 billion annually. The major players of this industry are Baxter International, Boston Scientific, Johnson & Johnson, and Medtronic, which produces surgical, ophthalmic, and dental instruments and supplies used in the medical field. It is said that the industry is well focused on the hands of 50 largest companies which make up the 75% income of the whole industry.Market Force 1: Technological Forces Armstrong and Kotler (2009) cited that the wonders of technology produce new markets and opportunities, though in some cases hurt other businesses. Technology is now molding the destiny of everyone in a very dramatic manner. Regularly, bullet proof vests must be upgraded when it comes to materials and workmanship, to be in congruence with the fast advancing and high-powered technology in ammunitions being sold in the marketplace.Customers require innovative designs combined with sophisticated and complex functionality for their bullet proof vests. Market Force 2: Demographic forces The world population increases rapidly, affecting the population demographically in terms of age, density, location, gender, race and occupation among others, (Armstrong and Kotler, 2009) . The doubling increase in population yearly has many implications in business, which could be in the form of opportunities or challenges. Since population is people, marketers are very concern and interested in this factor.For instance, crimes are becoming more and more intense and well-organized which calls for more police officers with advance combat gears for protection and safety. Market Force 3: Environmental Forces The natural environment plays a vital role in the production and marketing of bullet proof vests, especially when it comes to the materials being used. Corporate social responsibility and governme nt regulations on environment calls for the use of environmental friendly materials for products being manufactured in order to lessen the impact of pollution to human beings.The use of ApNano materials, for instance in personal safety equipment for saving lives and preventing injuries is a major breakthrough in bullet proof vests production. Strategies to Overcome the Threats The increasing threat when it comes to government regulations in promoting clean environment is also a technological and economic problem. There is a need for political will, large fund and more advanced way of protecting the environment, while making profit. One strategy is to produce practical and affordable products through continuous product development.This way though the product is highly advanced in technology, still more customers will have the capacity to buy the product because it could be offered in a competitive pricing strategy. Strategies to Capitalize on the Opportunities As the technological en vironment changes in a fast phased manner, more and more new products are being desired by customers. New and more advanced technology substitutes the older version, which means a need to produce creative and innovative products.Marketers should watch the technological environment very intimately, at the same time envisioning what most likely will be acceptable in the marketplace in days, months and years ahead. Research and development to come up with fresh and novel bullet proof vests is very essential. Conclusion Since the product bullet proof vests uses a rapidly changing technology, there is a need for tradeoff in order to maximize product performance, cost and reliability, so product development is the appropriate strategy.There is also a need to focus on high level of service and responsiveness to answer to customer requirements of safety and protection while at the same time. There has to be fast product creation which means developing products very quickly in order to start benefiting from these products. References Armstrong, G & Kotler, P. (2009). Marketing: An Introduction, 9th ed. Prentice Hall. www. nanotech-now. com/news. cgi? story_id=29842

Government Essay

Should wealthy nations be essential to sh argon their wealth among unworthyer nations by providing such(prenominal) things as food and nurture? Or is it the responsibility of the governments of poorer nations to way after their citizens themselves? What should a government do for a body politic to bewilder winnerful? Should money be spent on space geographic expedition?Should rich countries forgive wholly debts for poor countries? Does foreign encour get on with help beaverower countries much than the recipients? Should rich countries represent to a vaster extremity for environmental damage? Most risque level jobs atomic human action 18 done by men. Should the government encourage a true percentage of these jobs to be reserved for women? Should growth countries come down on improving industrial skills or should they promote education prototypical? Safety standards argon important when construction muckles homes. Who should be obligated for enforcing strict b uilding codes the government or the slew who build the homes? contend the reinforcement and disadvantage of giving realness-wide aid to poor countries.Should criminals be punished with lengthy jail terms or re-educated and rehabilitated organic evolution community service programs for instance, before cosmos reintroduced to society? In intimately countries disenable commonwealth be not catered for adequately, e.g. buildings are often inappropriately designed. Governments rely as well heavily on charities and voluntary organizations to pr say assistance and funding. What further measures could be taken to assist disabled people? In your look should government intervene in the rights of the individual with regard to family planning? The best way to adulterate the number of craft accidents is to make all young drivers screw a right driving education course before being commissioned to drive.Nowadays doctors merchant ship become very rich. Maybe they should not focus on profitable activities such as ductile surgery or looking after rich patients and concentrate more(prenominal)(prenominal) on patients health, no matter how rich they are? Does travel help to promote brain and communication between countries? In your opinion what factors contribute to a dandy moving picture? ar famous people do by unfairly by the media ? Should they be given more privacy, or is the price of their fame an encroachment into their private lives? Is animal testing prerequisite? Some businesses now say that no one can smoke cigarettes in any of their offices. Some governments have verboten smoking in all normal places. Do you barrack or discord? experience reasons. To what outcome is the work of animals in scientific research acceptable? military man beings do not need to swallow meat in narrate to have good health beca workout they can sop up all their food needs from meatless products and meatless substances. A vegetarian dieting is as heal thy as a diet containing meat. Argue for or against the opinion above. Forests are the lungs of the earth. Destruction of the mankinds forests amounts to termination of the field we currently know. To what extent do you harmonise or dissent? Are our zoos cruel to wild animals? plow.Zoos are sometimes seen as necessary but not poor alternatives to a natural environment. Discuss some of the arguments for and/or against keeping animals in zoos. To what extent depart migration from the development world to the developed world become a social and political act in the 21st century? In Britain, when mortal gets doddering, they often go to live in a home with other old people where there are nurses to look after them. Sometimes the government has to pay for this care. Who should be responsible for our old people? harbor reasons.The first car appeared on British roads in 1888. By the course of instruction 2000 there may be as some as 29 cardinal vehicles on British roads. sel ection forms of dishonor should be encouraged and international laws introduced to aver car ownership and use. What do you imagine? The best way to reduce the number of traffic accidents is to make all young drivers complete a safe driving education course before being licensed to drive. News editors purpose what to broadcast on TV and what to home run in newspapers. What factors do you think fascinate their decisions? Have we become used to prominent news? Would it be better if more good news was reported? TV could you be without it? Discuss.To what extent will migration from the developing world to the developed world become a social and political issue in the 21st century? The megabucks media, including TV, tuner and newspapers, have great regulate in shaping peoples ideas. To what extent do you agree or protest with this disputation? Give reasons for your answer. touristry is becoming increasingly important as a source of revenue to many a(prenominal) countries but its disadvantages should not be overlooked. What are some of the problems of tourism? The mass media, including TV, radio and newspapers, have great influence in shaping peoples ideas. To what extent do you agree or disagree this statement? Give reasons for your answerDoes modern font technology make life more convenient, or was life better when technology was simpler? Will modern technology, such as the internet ever replace the watchword or the written word as the main source of info? We are becoming increasingly dependent on reckoners. They are used in businesses, hospitals, shame detection and even to fly planes. What things will they be used for in futurity?.Is this dependence on computers a good thing or should we be more suspicious of their benefits?Use specific exposit and examples in your answer. In what ways has information technology changed work and working practices in the past 10 years? engine room is making communication easier in straight offs world, but at the disbursal of personal contact as many people choose to work at home in front of a computer screen. What dangers are there for a society which depends on computer screens preferably than face-to-face contact for its main message of communication? Will the Internet chip in people of the world closer together? The first car appeared on British roads in 1888. By the year 2000 there may be as many as 29 million vehicles on British roads. Alternative forms of transport should be encouraged and international laws introduced to control car ownership and use. What do you think? The mass media, including TV, radio and newspapers, have great influence in shaping peoples ideas. To what extent do you agree or disagree this statement? Give reasons for your answer.Should retirement be compulsory at 65 years of age? teleworking refers to thespians doing their jobs from home for part of each calendar week and communicating with their office using computer technology. Telecommuting is gro wing in many countries and is expected to be common for about office workers in the coming decades. How do you think society will be affected by the growth of telecommuting? In some countries the average worker is obliged to retire at the age of 50, while in others people can work until they are 65 or 70. Until what age do you think people should be encouraged to remain in paid employment? Give reasons for your answer.To what extent should economic planning be influenced by the need of environmental conservation? vituperate of the environment is an inevitable consequence of world-wide improvements in the standard of living. Discuss. The rising levels of congestion and air pollution found in most of the world cities can be attributed directly to the rapidly increasing number of private cars in use. In order to reverse this decline in the persona of life in cities, attempts must be made to encourage people to use their cars less and public transport more. Discuss possible ways to encourage the use of public transport.The threat of nuclear weapons maintains world peace. Nuclear power provides cheap and straight energy. The benefits of nuclear technology far preponderate the disadvantages. Do you agree or disagree? Give reasons for your answer.Education is the single most important factor in the development of a country. Do you agree? What are factors which are related to academic success in high-school students? Do the benefits of study abroad justify the difficulties? What advice would you offer to a potential student? The idea of going overseas for university study is an exciting prospect for many people.But while it may offer some advantages, it is probably better to nonplus home because of the difficulties a student necessarily encounters living and studying in a different culture. To what extent do you agree or disagree this statement? Give reasons for your answer. Education is recognized as live to the future of any society in todays world. Gov ernments throughout the world should make education compulsory for all children between the ages of 5 and 15. To what extent do you agree or disagree with this statement? Foreign language instruction should set about in kindergarten. Discuss. Should sports classes be sacrificed in risque School so students can concentrate on academic subjects?